News
Specializing in the R&D and manufacturing of CNC periphery grinding machines for indexable inserts
2025/07/14
After shutting down and disconnecting power, clean the interior of the machine to ensure cleanliness in both the machining area and the robotic arm area. A full cleaning of the machine's interior and exterior should be performed weekly. When cleaning, avoid damaging any machine components or protective devices. Do not use strong acids, strong alkalis, or similar liquids, as they may corrode paint, pipelines, rubber parts, and other materials. Do not use items with hard particles for cleaning, and never scrape directly with steel tools, as this may damage components and affect the machine’s appearance.
2025/03/21
After powering on the machine each day, check the hydraulic oil level, ensure the motor and radiator are functioning properly, listen for any abnormal sounds, verify the pressure indicator is accurate, and inspect for any oil leakage. If any abnormalities are found, shut down the machine for inspection and repair. Clean the hydraulic tank and its components once a week. Replace the hydraulic oil annually. Hydraulic hoses should be replaced every three years.
2025/03/21
The electric pressure-relief type grease lubrication pump is used to lubricate the guideways . When a low lubrication oil alarm occurs, turn off the machine power, open the lower rear door, and fill the lubrication oil through the oil filling port using a dedicated grease gun. The oil type and the location of the oil filling port are detailed in the lubrication system section. Regular inspections can also be performed to ensure sufficient lubrication oil levels.
News
Focus on us
International Service Hotline
online message
* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.